I have decided to get a suppressor to hunt with since I have access to a spot where there is some housing in the area. I have tried doing some research not only on the internet, but from this site also, but my knowledge is still very limited. I know that I want to go with the trust, and after talking with my local gun shop, I know I have to get passport photo, and go get fingerprinted. I have heard some of y'all talk about stores with a kiosk, does kiosk do all this for you, or do you still have to go do that yourself? The gun shop also recommended a Yankee hill suppressor, would this be a good one to go with? I aslo will be purchasing a new rifle that is already threaded for the suppressor, but I also have at least one other gun that I would like to be able to use , but it is not threaded. Is there a good gunsmith in Alabama that could do this, cause I know there isn't one in my area (Gadsden) that I would trust to do it. Alot of rambling questions, but maybe it makes since. Thanks

I would suggest a Silencerco Hybrid Incase you want to use it on a different gun

Yes, to the first question. If you go to a store that has the kiosk, you can do every bit of it at the store and you do t have to do anything else on your own.

I don’t know anything about that suppressor. You might go to different places and check out several different models. Unless you are going to use it on a pistol, there is not any reason to get the hybrid. For a rifle only, I would look at some other models.

There are a lot of places where you can get your barrel threaded.

Not to Hijack, but do you have to have a separate trust for
each suppressor? Or am I covered with the one?

You don’t have to, but you can. I would say to use one

The best place I have found for suppressors is Nichols outfitters in Pelham. They have a large selection and have a kiosk.

How far do you plan to shoot. A supressor reduces noise but even with a 300 black out and suppressed ammo it is still a noise and you only get about 100 yds of accuracy I have a yankee hill that I like but if my shots were going to be under 100yds I would go get raven cross bow

^^This

Yankee Hill would NOT be in my first 10 choices of suppressors. There are several manufacturers that build better products. I suspect the dealer that recommended that suppressor has a higher profit margin on those than any other.

Here's a place that has all the info that you'd ever need to know about suppressors....

http://www.silencertalk.com/forum/index.php

Do yourself a favor and drive down to Nichols Outfitters.

Much better choices than YHM

Check out Black Ankle Munitions out of Scottsboro. The owner is real helpful and can do all the paper work. https://www.blackanklemunitions.com highly recommend.