Here is what I did to be able to use a groundhog effectively. I fabbed up a mount for my ATV using a different receiver hitch. Took it to a machine shop to have them drill the proper holes so it would mount up. If you need a better pic, I can show you the back of ATV when I get home. Basically there is now way a 1.5 in or whatever the small side of the connected on the ground hog will survive moderate use. You have to upgrade to the 2 inch one. Like the way the guy using his truck had one with that one. The small one will just crack the receiver hitch on the ATV/UTV in the corners.

Here is finished product. The ground hog works better if you can go at a faster pace. If the ground is flat, then I go in high gear, if its has any slope at all, I go in low. This is finised project.

There ya' go !

Thanks guys