What have you used or seen that has performed the best?

I have a Summit Plot Mule, it works great. Takes a good sized machine to pull it.

There is one in the classifieds a friend of mine has. I have one just like it and I have used mine for over 15 years with no issues whatever. They are heavy and do a great job, but they are not a plow! If the ground is dry and hard you need to wait until the ground is wet enough to cut and allow the disk to get a good cut in the soil. What I like most about these is they are greaseable and will flip over to pull to the field you want to break up. They will also go wherever your ATV will go as you are pulling it right behind it. They are also a lot easier to transport than a tractor on a trailer.

We usually always disk the fields that are the easiest to get to and use the small disks on the fields that have access issues. Works for me!

Tartar Gate

I found a Summit Plot Mule that I will most likely get. What are you pulling it with?

We have a King Cutter that put some weights on top of it. I pull it with my wheeler. Best if the soil is wet.

I use to pull it with a Yamaha Grizzly 600, no I use a Polaris Ranger.

all i had was 4wheeler. i'd find a old 5" pull behind harrow and take the 4 outside disc off . do a much better job ones for 4wheelers don't cut it . imo

I've put this up before. These things work good on the back of a truck. You CAN back up even though you cant see. Just stop if you feel resistance, and get out and see what's going on.
If your truck has some weight in it, (corn, lime, seed) so much the better. Note the cheap ramps for getting it on and off.

This is the best cutting ATV disc I've ever used. It's a copy of a Tarter brand. My brother made two of them partly out of a light duty, 5', 3 point tractor disc. It cuts about as well as a light tractor disc but not as wide. Weight per blade is key and this thing is heavy for size.

Seems like I've seen one of these somewhere before🤔

Used the plot mule yesterday for the first time and it did excellent! It far exceeded my expectations. It cut just as good as if you were discing with a tractor. The only downside is that you are only cutting about 3.5’ wide at a time.

Bward / tree dweller - what is that on the back of the truck? Looks similar to a ground hog. What is it and where did u get it ??

That is a Battle Armor "Big Buck" 32" cut. I bought it on Amazon, although they are more costly now I see.
It's pretty brutal treatment to tear into that red dirt when it is grown over. It worked well for me though. Just
mow it first. ATV hitches are made from 2 layers of sheet metal usually. Not that hard to tear those up.

I finally broke a bearing on one of the blades after considerable use. This is not surprising due to jamming
the thing into the dirt. Took it apart and installed a new bearing and was back in business. Good luck !

PS. You will see my positive review on Amazon titled "Excellent Tool" if you look it up.

^^
Thanks

Something to consider - will look into

I spray my grass or kill it - dont hav tractor - get my buddy to plow it

And yea - that ground hog just screwed up my utv hitch reciever

Saw your review - do u think this will work on a truck? U ever used on a truck? May just get my best friend to help me plow again - i pay him - but this is intriguing

Probably rusty as $hit too!