Originally Posted by capehorn24
Originally Posted by 2Dogs
Originally Posted by BC
[Linked Image]


Those will work but they really need a washer and nut to cinch it tight to the wall , leaving enough of the screw out to hang the mount on.


You could rethread from the other end, let as much of the bolt sticking out as needed then put washer and nuts to tighten up. Making it into a toggle bolt with an all thread


That's what I'm saying except the rethread from the other end part. If you turn the bolt around , you don't have the head of the bolt to hold the mount on. You cinch it up with the nut , leaving much of the bolt with the head sticking outside. Those things require a pretty big hole to install too, not a fan , but they will hold a load.


"Why do you ask"?

Always vote the slowest path to socialism.